Evaluation Installation
On this page
The evaluation installation is one of the installation routes; see Installation Overview. It is a scripted sequence of install steps, not a wizard: the installer builds the step list from the prerequisite results and runs the steps in order on this computer.
IMPORTANT: The evaluation route is for evaluation only. When it installs SQL Server Express, it sets the password of the SQL Server sa login to sa and makes the instance reachable from the network.
Reusing an existing SQL Server also replaces the evaluation databases and evaluation login
listed in the confirmation prompt. Back up any evaluation data you need before continuing.
Before you begin
- To use an existing SQL Server instead of installing SQL Server Express: SQL Server 2012 or later, and a login that is a member of the
sysadminrole on that server. - To install SQL Server Express: outbound network access, because the installer downloads SQL Server Express Advanced during the installation. It skips the download when the installer's
Redistfolder already holds a matchingSQLEXPRADV_x64_ENU.exe. - The installer continues only when none of the route's prerequisite checks has failed; see Prerequisite checks.
In the installer
Run the evaluation installation
- On the Welcome page of the installer, choose Evaluation Installation ("Choose this option if you are evaluating the product."). When the installer finds installed products that it can upgrade, this entry reads Upgrade Existing Products instead and upgrades the locally installed products.
- Complete the pages of the route. Besides the SQL Server page, they include the prerequisites page (see Prerequisite checks), a license agreement page, and a ready page.
- On the SQL Server page, choose one of the options:
- Use your existing SQL Server, and then enter the SQL Server, Login, and Password of that server.
- Download and install Microsoft SQL Server 2017 Express Advanced on this computer. This option is selected by default. On a computer that is not 64-bit, this option is unavailable, and Use your existing SQL Server is selected instead.
- If you chose your existing SQL Server, the installer shows a Yes/Cancel prompt after the
sysadmincheck that lists the evaluation databases and the evaluation login it found on that server. Click Yes to continue: the installation drops those databases and the login and creates them again. - When the install steps are done, the finish page appears, with the Run Alloy Navigator 2026 Settings check box. Click Finish to close the wizard and open the Evaluation Installation Summary page.
On the SQL Server page:
- With an existing SQL Server, the installer refuses a SQL Server older than 2012 with the message "Your version of Microsoft SQL Server is not supported. Use Microsoft SQL Server 2012 or later." It then checks that the login is a member of the
sysadminrole. - With the option to install SQL Server Express, the installer refuses to continue when the
ALLOY2026EVALinstance already exists. It tells you that the instance has already been installed as.\ALLOY2026EVALand offers the alternative of uninstalling that instance first.
The finish page is headed Congratulations! when every install step succeeded, and Evaluation Installation Completed when one did not.
Prerequisite checks
The evaluation route has its own list of prerequisite checks: product compatibility, the operating system, physical memory, IIS, .NET Framework 4.8, the ASP.NET Core Hosting Bundle, PowerShell, and free disk space. A first-time installation is not checked for HTTPS.
| Check | Passes when |
|---|---|
| Operating system | 64-bit Windows 8 or Windows Server 2012, or later. When SQL Server is being installed, anything older fails. Otherwise, 32-bit Windows 8, Windows 10 and later, and Windows 7 SP1 or Windows Server 2008 R2 SP1 also pass. A domain controller fails. |
| Physical memory | At least 1 GB when SQL Server is part of the installation, otherwise at least 500 MB. |
| IIS | IIS is installed and configured, and the W3SVC service is running. The installer offers to start the service. |
| .NET Framework 4.8 | .NET Framework 4.8 is installed. |
| ASP.NET Core Hosting Bundle | The ASP.NET Core Module V2 (aspnetcorev2.dll) is version 16.0.21322.1 or later. |
| PowerShell | The PowerShell 3 engine is registered on the computer. The failure message asks for PowerShell 3.0 or later, up to 5.1. |
| Free disk space | The Program Files volume has at least the sum of the space budgets of the components being installed. |
On the evaluation route, an operating system older than Windows 7 SP1 or Windows Server 2008 R2 SP1 and too little physical memory are failures, not warnings.
The space budgets are:
| Component | Budget |
|---|---|
| SQL Server Express | 4300 MB |
| .NET Framework 4.8 | 2560 MB |
| ASP.NET Core Hosting Bundle | 390 MB |
| Alloy Navigator | 600 MB |
| Alloy Discovery | 500 MB |
| Web App | 120 MB |
| Self Service Portal | 32 MB |
| API | 32 MB |
The evaluation route starts from the Alloy Navigator and Alloy Discovery budgets and adds the Web App, Self Service Portal, and API budgets only once the IIS check has passed, so the disk space figure the installer shows changes as the checks run.
On the prerequisites page:
- The checks run once when the page opens. Recheck runs them again. It first rereads the machine and user
Pathvalues from the registry, so a path change made by a prerequisite you have just installed is picked up without restarting the installer. - Next stays unavailable until no check has failed. A warning does not block Next.
- Clicking the message of a failed or informational check opens its details. The details can show a link and, for .NET Framework 4.8 or the ASP.NET Core Hosting Bundle, a button that starts that component's installer and closes the details.
What the install steps do
The installer runs these steps in order, and recalculates its time estimate from the actual elapsed time as it goes:
- .NET Framework 4.8 and the ASP.NET Core Hosting Bundle, when the prerequisite results call for them.
- Download and installation of SQL Server Express, when you chose it.
- Installation and configuration of Alloy Navigator, and then of Alloy Discovery.
- Installation and configuration of the Web App, the Self Service Portal, and the API, in that order, only if the IIS check passed.
When the installer installs SQL Server Express, it installs it in mixed authentication mode, sets the sa password to sa, enables TCP/IP and named pipes, sets the SQL Server Browser service to start automatically, and sets the FILESTREAM level of the instance to 1.
The database is created as a sample database. Before creating it, the installer drops any existing evaluation database and the evaluation SQL Server login, and it drops and recreates the Alloy Discovery evaluation database the same way. Full-text search is enabled on the database when full-text search is installed on the SQL Server instance.
When a step needs a restart, the installer records its progress, restarts the computer, and resumes at the recorded step after the restart. If that resume is interrupted, the recorded progress is lost, and you must start the evaluation installation again.
What the evaluation installation produces
The identities of an evaluation installation are fixed values, the same in every copy of the installer, except the Database Account password:
| Item | Value |
|---|---|
| SQL Server instance | ALLOY2026EVAL |
| Database | AlloyNavigatorEval |
| Database Account login | AlloyEvalDatabaseAccess |
| Database Account password | Generated for each run |
| Alloy administrator account | Admin, with a blank password |
| Self Service Portal customer account | Demo, with a blank password |
| Web App, Self Service Portal, and API virtual directories | wp, hd, and api |
SQL Server sa password, when the installer installs SQL Server Express |
sa |
The Evaluation Installation Summary page shows the fixed values.
The installation also produces:
- The Evaluation Installation Summary page,
AN_EvaluationInstallationSummary.htm, in theDocumentationfolder of the Alloy Navigator installation, with the information you need to reach each component. An Evaluation Installation Summary shortcut to it is placed on the desktop and in theAlloy Softwarefolder of the Start menu. - The Database Access Key file, a
.regfile named after the Database Account login, on the all-users desktop. Web App.urlandSelf Service Portal.urlshortcuts on the all-users desktop, pointing at the two instances the installation published.- An installer log of every install step and of the diagnostics of the checks.
The components themselves are reached from the Alloy Control Panel, which lists what it finds installed on the computer. Its Product Links group includes an Evaluation Installation Summary item.
The evaluation installation does not activate a license. You apply the license afterward in the Settings App; see Admin Center and Settings App.