Work Order Workflow
On this page
Default Workflow: This page describes the work order workflow of a new Alloy Navigator 2026.1 database created with the Default Workflow. An upgraded database need not have this content, and an administrator may have changed it. See Default Workflow Configuration.
In this configuration, there is no general status-change action; you change a work order's status with named actions. For where a ticket's actions are and how to run them, see Work on a Ticket.
Unless otherwise noted, the actions in the table of the Action reference are offered to the Administrator (Full), Administrator (Workflow), Change Request Manager, Change Request Technician, Problem Manager, Problem Technician, Service Desk Manager, and Service Desk Technician roles. Mark as Duplicate, Approve Request, Reject Request, Add Comment, and Notify Assignee are offered to every role of the supplied configuration except the Administrator (Log Management), Administrator (Security), Administrator (Services), Administrator (Views/Dashboards), Report Designer, Report Viewer, and Viewer roles.
Assign, complete, and close a work order
- Assign the work order. To take it yourself, run Assign to me: you become the assignee, and the status becomes In Progress. The action sets Assigned, and the work order moves on at once, because an Assigned work order that its assignee saves moves to In Progress. To assign it to someone else or to a group, run Assign to..., choose the assignee group, the assignee, or both, and click Submit; the status becomes Assigned when a new assignee is set, and Unassigned when only a group is set. Both actions are offered in Unassigned, Assigned, In Progress, Approved, and Completed, and Assign to me only while you are not the work order's assignee.
- To schedule the work, run Schedule Work. It is offered in Assigned, In Progress, On Hold, and Approved while the scheduled start date or the scheduled end date is empty, and also to the Service Request Manager and Service Request Technician roles. In the "Schedule Work" form, enter the scheduled start date and the scheduled end date, which are required, and optionally a Comment and the Time Spent, and click Submit. The start date must be after the work order's submit date, and the end date must be after the start date and before the due date; otherwise an error message stops the submission. The two dates are saved on the work order, and the status stays.
- Record your work with Log Work, which is offered in every status except Closed, and only to the work order's assignee. It sets In Progress when the work order is Assigned. Saving an Assigned work order while you are its assignee also moves it to In Progress.
- Run Complete Work Order, fill in the "Add a Comment" form, and click Submit. Complete Work Order is offered in Assigned, In Progress, On Hold, Approved, and Rejected. The status becomes Completed, and the completed date is set if it is empty.
- Run Close Work Order, which is offered in Completed and only to the Administrator (Full), Administrator (Workflow), Change Request Manager, Problem Manager, and Service Desk Manager roles, choose a Closure Code, and click Submit. The status becomes Closed.
A work order that stays Completed without changes is closed automatically after a set number of days; see Automatic status changes. Complete Work Order stops when the work order's requester has no valid primary e-mail address; see Find out why an action stops on an e-mail address.
Other work order tasks
Put a work order on hold
Run Place On Hold, offered in Assigned, In Progress, and Approved. The status becomes On Hold. To continue, run Take Off Hold, which sets In Progress, also when the work order was Assigned or Approved before it was put on hold.
Reopen a closed work order
Run Reopen Work Order, which is offered only while the work order is Closed. Its form, "Reopen this Work Order", shows the work order's current assignee group and assignee, which you can change (the assignee is chosen from the members of that group), and has a Comment and Time Spent. Click Submit. The work order logs "Work Order was Reopened" and is set to In Progress. It then becomes Unassigned when it has a group but no assignee, and Assigned when its assignee was changed, in which case the assignee receives an e-mail. The completed date and the closure code are cleared.
Mark a work order as a duplicate
Run Mark as Duplicate, which is offered in every status except Closed. In the Web App, it is on the work order's toolbar, not on the Action Bar. In the "Mark Request as Duplicate" form, choose in Duplicate of, which is required, the work order that this one duplicates; the work order itself is not offered. The form also has Comment and Time Spent. Click Submit.
The action relates the two work orders and closes this one with the closure code Ticket Duplicated. It also sets the start date, when the work order has an assignee, and the actual response date and the completed date, each only if it is empty. It notifies the assigned party, and the other work order gets an activity whose details hold this work order's description.
Use a consumable on a work order
Run Use Consumable to record a consumable used on the work order's computer or hardware item. It is offered in Assigned, In Progress, and Approved, and only while the work order's related CI is a computer or a hardware item.
In the "Use a Consumable" form, the work order's related CI is filled in and cannot be changed. Choose the Consumable and the Reason. The Quantity Used is pre-filled with 1, and Used on with the current date and time. These fields, the related CI included, are all required; the form also has Comment and Time Spent. Click Submit.
The action lowers the consumable's quantity by the quantity used, records a stock movement, relates the computer or hardware item to the consumable, and logs the quantity and the consumable on the work order. When you use all that is left, the consumable is set to Depleted. The work order's status stays. The action is refused with "There are no consumables currently available for use." when the consumable has no quantity left or is Depleted, and with a message that gives both quantities when you enter more than is available. See Stock and Consumables.
Create a work order from a work order
Run Create Work Order, which is offered in Assigned, In Progress, On Hold, and Approved. In the Web App, it is in the Relationships section of the Action Bar.
Its form, "Create a Work Order", requires a summary and a description, which are pre-filled with the work order's, a type, and a requester. The requester starts empty and can be any person; the requester list is filtered by the work order's own organization, not by the organization chosen on the form, and is not filtered when the work order has no organization. The assignee group, the assignee, and the related CI are pre-filled with the work order's, and the service with General Work Order; the assignee can only be a member of the work order's own assignee group. You can also set the organization, the category, the project, the urgency, the impact, and the scheduled start and end dates, and add attachments.
When you submit the form, the action logs "Created Related Work Order" on the work order and creates a new work order whose parent is this work order, in its workspace, with the form's attachments. The new work order takes the organization of its requester, not the organization chosen on the form. Auto-assignment runs on the new work order: it is Unassigned when only a group is set, and Assigned, with an e-mail to the assignee, when an assignee is set. In the Web App, the new work order opens when the action completes. The status of this work order does not change.
Create a knowledge base article from a work order
Run Create Quick Article, which is offered in Assigned, In Progress, On Hold, Approved, and Completed, and also to the Knowledge Base Manager and Knowledge Base Contributor roles. In the "Create a Knowledge Base Article" form, choose the Type. The Title, Content, and Resolution are pre-filled with the work order's summary, description, and resolution. All four fields are required, and the form also takes attachments. Click Submit.
The work order logs "Created Related Knowledge Base Article", and a knowledge base article related to it is created at Draft, version 1.0, with the public flag cleared, so the article is private. The article's content holds the Content under the heading "OVERVIEW" and the Resolution under "SOLUTION", and ends with the heading "REFERENCE" and the text "No References Currently Exist." The attachments go to the article, and the work order's status stays. For what happens to the article next, see Knowledge Base Article Workflow and Knowledge Base.
Request an approval
Create Approval is offered in Assigned and In Progress. Request Approval is offered in the same statuses while the work order has a pending approval stage and a pending approval request, and it sets Pending Approval. Both are also offered to the Service Request Manager and Service Request Technician roles. In Pending Approval, a pending approver of the pending approval stage votes with Approve Request or Reject Request. The approval outcome sets Approved or Rejected. See Approvals.
Statuses and lifecycle stages
A work order uses nine statuses: Unassigned, Assigned, In Progress, On Hold, Completed, and Closed, and, for approvals, Pending Approval, Approved, and Rejected.
A new work order is created as Unassigned. Unless it is created through the API, auto-assignment then runs on it, and the work order becomes Assigned only when its form names an assignee: auto-assignment picks no assignee for a work order, because the workflow parameter Assignee Load Balancing Method is set to Disable Load Balancing for work orders in the supplied configuration. When the work order has neither an assignee group nor an assignee, it gets the support group of its service, while the workflow parameter Service Support Group Assignment is on, as it is in the supplied configuration. General Task and Research, the entries of the work order's New menu in the Web App, open the form "Create a Work Order", which has no field for an assignee group or an assignee, so the new work order stays Unassigned with the support group of its service; the form of the same title that Create Work Order opens on a work order has both fields (see Create a work order from a work order). A work order created from a service request gets its status only from auto-assignment (see Create a work order from a service request).
In the Web App, the progress bar at the top of a work order's full form shows five lifecycle stages (see Follow the ticket's progress):
| Stage | Statuses |
|---|---|
| Submission | Unassigned, Assigned |
| Approval | Pending Approval, Rejected |
| Planning | Approved, On Hold |
| Completing | In Progress |
| Close | Completed, Closed |
Action reference
Where the actions are in the Web App and in the Mobile App is described in Work on a Ticket; for the Web App, see also Actions in the Web App.
| Action | Offered in | What it does |
|---|---|---|
| Assign to me | Unassigned, Assigned, In Progress, Approved, Completed, while you are not the work order's assignee | Makes you the assignee and your top-ranked group the assignee group, sets the status to Assigned, sets the start date if it is empty, logs "Current user assigned to self", and notifies the collaborators. The work order then moves on to In Progress, as an Assigned work order does when its assignee saves it. A Completed work order keeps its completed date. |
| Assign to... | Unassigned, Assigned, In Progress, Approved, and Completed | Opens the form "Assign this Work Order" with Assignee Group, Assignee, Comment, and Time Spent, none of them required. The status becomes Unassigned when only a group is set and Assigned when a new assignee is set. |
| Place On Hold | Assigned, In Progress, Approved | Sets On Hold. |
| Take Off Hold | On Hold | Sets In Progress, whatever status the work order had before the hold. |
| Complete Work Order | Assigned, In Progress, On Hold, Approved, Rejected | Opens the form "Add a Comment". Sets Completed, and sets the completed date if it is empty. |
| Close Work Order | Completed; only the Administrator (Full), Administrator (Workflow), Change Request Manager, Problem Manager, and Service Desk Manager roles | Sets Closed, logs "Marked as 'Closed'", and sends notifications. The form requires a Closure Code. |
| Reopen Work Order | Closed | Opens the form "Reopen this Work Order". Logs "Work Order was Reopened" and sets In Progress, then Unassigned when the work order has a group but no assignee, or Assigned, with an e-mail to the assignee, when the assignee was changed. Clears the completed date and the closure code. |
| Schedule Work | Assigned, In Progress, On Hold, Approved, while the scheduled start date or the scheduled end date is empty; also the Service Request Manager and Service Request Technician roles | Opens the form "Schedule Work", which requires the scheduled start date and the scheduled end date and checks them against each other and against the work order's submit date and due date. Saves the dates, logs "Scheduled Work", and notifies the collaborators; the status stays. |
| Log Work | Every status except Closed, and only for the work order's assignee | Sets In Progress when the work order is Assigned; otherwise the status stays. |
| Add Comment | Every status except Closed, when the work order has no assignee or another assignee | The status stays. |
| Notify Requester | Every status except Closed, when you are not the requester | The status stays. |
| Notify Assignee | Every status except Closed, when the work order has an assignee other than you | The status stays. |
| Automatic Timer On, Automatic Timer Off | Assigned, In Progress, Approved; Automatic Timer On while the timer is stopped, Automatic Timer Off while it is running | The status stays. |
| Use Consumable | Assigned, In Progress, Approved, while the work order's related CI is a computer or a hardware item | Opens the form "Use a Consumable". Lowers the consumable's quantity by the quantity used and relates the computer or hardware item to the consumable; the status stays. |
| Create Work Order | Assigned, In Progress, On Hold, Approved | Opens the form "Create a Work Order" and creates a work order whose parent is this work order; the status stays. See Create a work order from a work order. |
| Create Quick Article | Assigned, In Progress, On Hold, Approved, Completed; also the Knowledge Base Manager and Knowledge Base Contributor roles | Opens the form "Create a Knowledge Base Article", logs "Created Related Knowledge Base Article", and creates a related, private knowledge base article at Draft; the status stays. |
| Mark as Duplicate | Every status except Closed | Opens the form "Mark Request as Duplicate". Closes the work order with the closure code Ticket Duplicated and relates it to the work order it duplicates. |
| Create Approval | Assigned, In Progress; also the Service Request Manager and Service Request Technician roles | Creates an approval stage with its approval requests; the status stays. |
| Request Approval | Assigned, In Progress, while the work order has a pending approval stage and a pending approval request; also the Service Request Manager and Service Request Technician roles | Sets Pending Approval. |
| Approve Request and Reject Request | Pending Approval, only for a pending approver of the pending approval stage | Record the vote and leave the status as it is; the approval outcome sets Approved or Rejected. |
| Cancel Approvals | Assigned, In Progress, Pending Approval, while an approval stage is Pending or Pending Approval; only the Administrator (Full), Administrator (Workflow), and Approval Manager roles | Sets the approval stages that are Pending or Pending Approval, and their pending approval requests, to Not Required, and sets In Progress. |
For the approval actions, see Approvals. For the Log Work form, the automatic timer, Notify Requester, and Notify Assignee, see Work on a Ticket.
The close action changes only the work order itself: its work orders and approvals stay as they are, and no warning appears when the work order still has open work orders.
Actions in the Web App
In the Web App, a work order's full form shows its actions in sections of the Action Bar and on the form's toolbar (see Perform Actions on Records). The actions of each place are listed here in alphabetical order:
- In the General section, and not on the toolbar: Assign to..., Assign to me, Close Work Order, Complete Work Order, Place On Hold, Reopen Work Order, Schedule Work, and Take Off Hold.
- In the Communication section: Add Comment, Automatic Timer Off, Automatic Timer On, Log Work, Notify Assignee, and Notify Requester.
- In the Approvals section: Approve Request, Cancel Approvals, Create Approval, Reject Request, and Request Approval.
- In the Relationships section: Create Quick Article, Create Work Order, and Use Consumable, and Follow and Unfollow, which are also on the toolbar.
- Only on the toolbar: Collaborators, Copy Work Order, and Mark as Duplicate.
In a list of work orders in the Web App, the Actions menu offers all of these actions, wherever the form shows them, and each of them except Copy Work Order can run on several selected work orders.
Automatic status changes
- When an Assigned work order is saved while you are its assignee, it moves to In Progress.
- When a service request or a change request is completed, or an incident or a problem is resolved, its child work orders that are not Closed are set to Completed.
- When the last of a ticket's work orders that is not Closed is completed, the ticket becomes Completed if it is a service request, a change request, or a work order, and Resolved if it is an incident or a problem. This rule and the one above are each controlled by a workflow parameter of their own, and both are turned on in the supplied configuration.
- A work order that stays Completed without changes for the number of days in its workflow parameter is closed automatically. The day count is set to 14 in the supplied configuration, and a value of 0 turns the automatic closing off. The activity logged gives the number of days, for example "Automatically Closed after 14 day(s)".